Ruixue tells you how industrial chillers are used for water treatment.
In a common industrial chiller, the compressor is the heart of the refrigeration system. It draws low-temperature and low-pressure refrigerant gas from the suction pipe, and after the motor is driven to drive the piston to compress it, the high-temperature and high-pressure refrigerant is discharged to the exhaust pipe. The gas, which provides power to the refrigeration cycle, to achieve a refrigeration cycle of compression→condensation→expansion→evaporation (endothermic).
How to operate the industrial chiller water treatment needs to be revealed:
1. Open the water inlet and outlet gates of the switching well according to the dispatching instructions, and close the other gates.
2. Before the pump starts, it should be lubricated to the water-filled rubber bearing on the stuffing box. After the pump is out of water, it can be closed. It is appropriate to have water droplets. Check the oil level of the pump bearing position to ensure the smooth flow of water and oil. .
3. Before starting the pump, check that the connection parts are not loose. Turn the coupling by hand to see if it is flexible and whether there is noise in the pump.
4. When the pump starts, the machine should not stand next to the machine. After starting, it should be checked for at least five minutes to check the equipment. If there is abnormal vibration and sound or the water is abnormal, it should be stopped and checked. Never leave the machine immediately after it is put into operation. Pump.
Our company is based on the R&D and design ideas of “low temperature green refrigeration, high efficiency, energy saving and environmental protection”, integrating advanced refrigeration technology from Europe and the United States. Combining internationally renowned brands of refrigeration components to develop energy efficient central air conditioning units, industrial chillers, medium and low temperature chillers, etc. Welcome to inquire!